Inexpensive Update For Old Trailer Flooring

My trailer is a 1986, it’s old but it’s paid for. The floor itself was in good shape, but the floor covering was not great (honestly half of it was really bad – the carpeting). We decided the carpeting had to go, and the linoleum could use an update. I know how to lay down sheet flooring, but the thought of working around all the corners and cabinets seemed challenging. We thought we would try stick on tiles. We found the cheapest tile @ $.29 a square and it had a 80’s look too. I wasn’t sure if the sick on tile would stay stuck with the temperature changes. It’s stayed in place for over a year now.

Here’s what you need to do:
1. Remove the carpeting (linoleum is installed the entire length even under the carpeting, do not remove)
2. Make sure there are no staples or tacks. I pulled most but had to pound a few down and grind a few.
3. Remove items that you can like the toilet or tables.
4. Use a product like TSP to clean the linoleum. It gets rid of wax and dirt.
5. If you have any tears in the old linoleum you can use a skim coat to level out the flooring. Any bump or dirt will show up with the shine of the new linoleum.
6. I started my first row at the door way. Remember you need to keep tiles square (a little bit off shows up way off on a long run) existing cabinets & walls should be square.
7. Slide the tile close to the wall leave about a 1/8″ gap. I found these tiles need a little room for expanding and contracting.
8. Slide the next tile snug against the previous tile. Start with that edge pressing down working your way to the next edge.
9. You can cut the tile with the protective paper still on as you perfect the fit around items like cabinets. Remember to leave a little room for the tiles to expand.

Here’s my final product.

Leave a Reply

Your email address will not be published. Required fields are marked *